ck pulsar 125 Werkplaats-Handboek : Bladzijde 150

          15. IGNITION SYSTEM                                                                 Pulsar      CK   125


 CDI UNIT                                              CDI Unit                          CDI Unit Coupler
 REMOVAL
 Remove the seat and fuel tank. (Refer to 4-
 8.)
 Disconnect the CDI unit coupler and remove
 the CDI unit.



 INSPECTION
 Measure the resistance between the CDI unit
 terminals.
 Replace the CDI unit if the readings are not         SW (Black/White)         EXT (Black/Red) E2 (Green)
 within the specifications in the table below.
 The CDI unit is fully transistorized. For
    accurate testing, it is necessary to use a
    specified tester. Use of an improper
    tester or measurements in an improper
    range may give false readings.
    Use a Sanwa Electric Tester SP-10D or
    Kowa Electric Tester TH-5H for testing.


                                                        PC (Blue/      IGN (Black/        E1 (Green/White)
 Testing Range                                          White)         Yellow)
 Use the xK range for the Sanwa Tester.
 Use the x100 range for the Kowa Tester.

                                                                                                    Unit: K
                              (+)Probe    SW        EXT         PC          E2            E1          IGN
                                         (Black/   (Black/    (Blue/                    (Green/       (Black/
                           (-)Probe      White)     Red)      White)      (Green)       White)       Yellow)
                              SW
                             (Black/                                                                   
                             White)
                              EXT                              Needle      Needle
                             (Black/     3-6K                swings then swings then                   
                              Red)                                           
                               PC
                             (Blue/      35-42K    18-22K                 8-10K         8-10K          
                             White
                              E2                                                        There is
                                         15-18K 4.5-5.5K       7-9K                    continuity      
                            (Green)
                              E1                                          There is
                            (Green/      15-18K 4.5-5.5K       7-9K      continuity                    
                            White)
                              IGN
                            (Black/                                                       
                            Yellow)
                           Note: The readings in this table are taken with a Sanwa Tester.



                                                                                                     15-4