19. LIGHTS/METERS/SWITCHES DINK 50/125 HEADLIGHT A halogen headlight bulb becomes very hot while the headlight is ON, and remain for a while after it is turned OFF. Be sure to let it cool down before servicing. Remove the front cover (refer to the "FRAME COVERS REMOVAL/INSTALLATION" section in the chapter 2). Disconnect the headlight connector (1) from the headlight bulb and remove the dust cover (2). Unhook the retainer (3) and remove the bulb (4) from the headlight case. Avoid touching the halogen headlight bulb. Finger prints can create hot spots that cause a bulb to break. Install a new bulb in the headlight case, by aligning the bulb tab with the case groove. Hook the retainer. Install the dust cover properly on to the headlight and connect the headlight connector 19-3