3. INSPECTION/ADJUSTMENT UXV 500 STEERING SYSTEM INSPECTION Place the machine on a level place. Check the steering column bushings and bearings: Turn the steering right and Left, Replace the steering column bushings and or bearings if excessive play Check the tie-rod ends Turn the handlebar to the left and/or right until it stops completely, then slightly move the handlebar from left to right. Replace the tie-rod ends if tie-rod end has any vertical play. Tie-rod Ends Raise the front end of the machine so that there is no weight on the front wheels. Check ball joints and/or wheel bearings. Move the wheels lately back and froth. Replace the front arms and/or wheel bearings if excessive free play. 3-23