16. BRAKE SYSTEM UXV 500 Connect a transparent hose to the right caliper bleed valve and then loosen the bleed valve nuts. Use the syringe to draw brake fluid into it until there is no air bubbles in the transparent hose. Then, tighten the bleed valve nut. Torque: 0.6 kgf-m (6 Nm, 4.32 lbf-ft) Connect a transparent hose to the left caliper bleed valve and then loosen the bleed valve nuts. Use the syringe to draw brake fluid into it until there is no air bubbles in the transparent hose. Then, tighten the bleed valve nut. Torque: 0.6 kgf-m (6 Nm, 4.32 lbf-ft) · When drawing brake fluid with the syringe, the brake fluid level should be kept over 1/2 of the brake reservoir height. · Use only the recommended brake fluid. Recommended Brake Fluid: DOT-4 16-11