3. INSPECTION/ADJUSTMENT DINK50/125
SERVICE INFORMATION
GENERAL
WARNING
·Before running the engine, make sure that the working area is well-ventilated.
Never run the engine in a closed area. The exhaust contains poisonous carbon
monoxide gas which may cause death to people.
·Gasoline is extremely flammable and is explosive under some conditions. The
working area must be well-ventilated and do not smoke or allow flames or sparks
near the working area or fuel storage area.
SPECIFICATIONS
Throttle grip free play : 26 mm (0.080.24 in)
Spark plug : NGK: DPR7EA9(DINK 125)CR7HSA(DINK 50)
Spark plug gap : 0.9 mm (0.036 in-DINK 125)0.7 mm (0.028 in-DINK 50)
Valve clearance : IN: 0.1 mm (0.004 in) EX: 0.1 mm (0.004 in)~DINK 125
IN: 0.05mm (0.0024 in) EX: 0.05 mm (0.0024 in)~DINK 50
Idle speed : 1700 rpm~DINK 1251950~2150 rpm~DINK 50
Cylinder compression : 15 kgf/cm(1500 kPa,~DINK 125)14 kgf/cm(1400 kPa,~DINK 50)
Engine oil capacity:
At disassembly : 1.1 L (0.968 lmp qt, 1.166 US qt-DINK 125)0.85 L(DINK 50)
At change : 0.9 L (0.792 lmp qt, 0.954 US qt-DINK 125)0.70 L(DINK 50)
Gear oil capacity :
At disassembly : 0.2 L (0.176 lmp qt, 0.212 US qt-DINK 125)0.12L(DINK 50)
At change : 0.18 L (0.16 lmp qt, 0.190 US qt-DINK 125)0.11L(DINK 50)
Coolant capacity :
Reserve tank capacity: 0.37 liter (0.4 US qt, 0.33 lmp qt DINK 125 Only )
Radiator capacity : 1 liter (1.1 US qt, 0.88 lmp qtDINK 125 Only)
Ignition timing : 10°1.5°/1000rpm(DINK 125)28°2°/4000rpm(DINK50)
TIRE
1 Rider (60 kg) 2 Riders (110 kg)
Front 1.75 kgf/cm (175 kPa, 24.85 psi) 1.75 kgf/cm (175 kPa, 24.85 psi)
Rear 2 kgf/cm (200 kPa, 28.4 psi) 2.25 kgf/cm (225 kPa, 31.95 psi)
TIRE SPECIFICATION:
Front : 120/70-13
Rear: 140/70-12(DINK 125)130/70-12(DINK50)
TORQUE VALUES
Front axle nut : 6 kgf-m (60 N-m, 43 lbf-ft)
Rear axle nut : 12 kgf-m (120 N-m, 86 lbf-ft)
3-1
