16. BATTERY/CHARGING SYSTEM DINK50/ 125
(DINK 50)
REGULATOR/RECTIFIER INSPECTION
Remove the front cover.
Disconnect the regulator/rectifier wire coupler
and remove the nut to remove the
regulator/rectifier. Nut Regulator/Rectifier
Measure the resistances between the terminals.
Replace the regulator/rectifier if the readings are
not within the specifications in the table below.
· Due to the semiconductor in circuit, it
is necessary to use a specified tester
for accurate testing. Use of an
improper tester in an improper range
may give false readings.
Coupler
Probe
Probe(-) A (R) B (W) C (Y) D (G)
A (R) 3-4M
B (W) 6-8M
A (Red) C (Yellow)
C (Y) 14-15M
D (G) 14-15M
B (White) D (Green)
16-13
